Vulkan + OpenCL?

I've been slowly working on some OpenCL on Vulkan stuff using clspv. It's a bit too hot here, my heart isn't really in it, but I'm slowly making progress.

The last thing I checked in was an example that uses more complicated argument passing conventions and uses a small compiler to turn the descriptor map file from clspv into some tables used for initialisation and argument setting. Actually I wrote a patch for clspv to output the data type so the compiler can use it.

Of course along the way I hit fairly obtuse errors from vulkan regarding extensions and options which need to be enabled for the small kernel I wrote, but thanks to the validation layer they were able to be resolved without too much work.

I'm working on abstracting a lot of the details away into a more OpenCL-like API, the first few examples were stand-alone but there's really just so much boilerplate it makes it too confusing for an example. I've discovered a few options like VK_DESCRIPTOR_BINDING_UPDATE_AFTER_BIND_BIT_EXT and it's associated settings that are required for the kernels to behave somewhat like OpenCL where you can modify kernel arguments for subsequent submission. From my preliminary work I think most of the behaviour can be recreated, although the more limiting factor is the compiler and SPIR-V.

It can be found inside the opencl-args directory of zproto-vulkan, but I'll probably re-arrange the directory structure at some point and continue to work on the abstraction. As of this post it's pretty much just when I got it working at all and I didn't try to work on the queuing mechanism.

busymon - tool to force computer breaks

I had need of a tool to remind me (forcefully) to get off the computer and get up and walk around for a while. I was surprised I couldn't find anything simple to do this; I came across rsibreak but it looked like a mess to compile (i mean, cmake, obviously). I looked a bit more but nothing looked simple.

So here's a basic computer monitor that tells you off if you're at the computer too long - as a proxy for sitting.

As usual busymon has a software page and a repository.

In short my bicycle accident has lead to further complications, possibly in part due to sitting down for too long infront of my computer. So now i'm riddled with clots (some poetic license) and on blood thinners and should probably try not to make it worse. Hourly walking breaks are now doctors orders, and well, time just flies sometimes.

amdgpu / x570 / sea islands / IO_PAGE_FAULT

After turning on the amdgpu driver on my new system (radeon.si_support=0 amdgpu.si_support=1) so I could play with vulkan it seemed nice and stable.

But I was only playing around in emacs/netbeans/firefox and wasn't doing much with the graphics system. When I ran a JavaFX thing i've been playing with (the genetic art) and eventually it crashed the graphics driver. So I went back to radeon for the time being until I decided to look at it again.

Anyway today I had another look, and whilst logged on remotely I got the error log:

[  993.135454] amdgpu 0000:09:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0003 address=0xffffe05000 flags=0x0000]
[  993.135461] amdgpu 0000:09:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0003 address=0xffffe0a040 flags=0x0000]
[  993.135466] amdgpu 0000:09:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0003 address=0xffffe338c0 flags=0x0000]
[  993.135471] amdgpu 0000:09:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0003 address=0xffffe1d100 flags=0x0000]
[  993.135476] amdgpu 0000:09:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0003 address=0xffffe38900 flags=0x0000]
[  993.135481] amdgpu 0000:09:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0003 address=0xffffe5dd80 flags=0x0000]
[  993.135486] amdgpu 0000:09:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0003 address=0xffffe23580 flags=0x0000]
[  993.135491] amdgpu 0000:09:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0003 address=0xffffe25c00 flags=0x0000]
[  993.135496] amdgpu 0000:09:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0003 address=0xffffe4ed00 flags=0x0000]
[  993.135501] amdgpu 0000:09:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0003 address=0xffffe07a80 flags=0x0000]
[  993.135507] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0003 address=0xffffe52a00 flags=0x0000]
[  993.135512] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0003 address=0xffffe55200 flags=0x0000]
[  993.135517] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0003 address=0xffffe5a200 flags=0x0000]
[  993.135521] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0003 address=0xffffe5f2c0 flags=0x0000]
[  993.135526] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0003 address=0xffffe10700 flags=0x0000]
[  993.135531] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0003 address=0xffffe51600 flags=0x0000]
[  993.135535] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0003 address=0xffffe606c0 flags=0x0000]
[  993.135540] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0003 address=0xffffe4c7c0 flags=0x0000]
[  993.135544] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0003 address=0xffffe53e00 flags=0x0000]
[  993.135549] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0003 address=0xffffe58e00 flags=0x0000]
[ 1003.712058] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx timeout, signaled seq=144954, emitted seq=144956
[ 1003.712116] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* Process information: process Xorg pid 1301 thread Xorg:cs0 pid 1303
[ 1003.712118] [drm] GPU recovery disabled.

There wasn't a lot to be found on the internet regarding amdgpu but there were some other similar problems. The suggested fix was to add iommu=soft to the kernel arguments. I'm trying this now and so far it looks good!

I have been tracking the 5.4.x kernel releases and thought that might have something to do with it but fortunately not. When it crashed initially i'd just done a slackpkg upgrade-all and all sorts of things broke horribly. But that was my fault for overzealously removing packages that didn't look important: polkit uses a lot of snot unfortunately so I broke that. Fucking firefox lost all my settings though!

Zed's Bread Baby, ...

So I haven't been spending all my time just on the new computer, I've also been doing some cooking. It's quite a laborious process and the crutches keep getting in the way but most things only require short stints standing while the oven or mixer or some natural process takes it's course. Reminder: I'm on crutches until after xmas due to a broken hip. I can't go anywhere or do much or carry anything and even beer makes my foot swell up so I can't even bloody well get drunk.

Yesterday I made a pretty good approximation of a baguette - perhaps a bit too soft but it made a great chicken sandwich for dinner. And today I made a '(kneaded) no-knead' bread, and a couple of ciabatta.

A dutch-oven bread and a couple of ciabatta.

I sort of fucked up the latter because the starter was too cold in the fridge so the final dough was far too wet, but perhaps it turned out OK. I made some last week and didn't cook it long enough but otherwise it was an interesting bread with an almost rubbery texture quite unlike the standard recipe.

I'm going to write down the recipes I used here in part so I don't forget them. One might notice a lot of similarities in the steps - well that's just how you make bread I guess.

I don't normally bother adding salt but most bread recipes include it, perhaps 0.5 tsp. I notice the yanks put sugar in their recipes - sometimes alarming amounts - so maybe they just need the salt to make it palatable!

The bread improver could just be more flour. I use general purpose flour which is a bit too weak (low protein) to make good bread, and this helps make up for it a little bit. Adding an egg works really well but then you need to adjust the dry/wet ratio to account for it (just add a bit more flour usually).

Another trick which works on any of them is to spray water lightly a few times while it's baking. This will create a shiny hard crust by simulating a steam oven. I usually do it if i remember to as it doesn't take much work and is a nice touch.

I use a standard-sized kenwood chef mixer, and I have a new Bosch oven that has an almost moisture proof seal (nearly steamed my face off a couple of times opening it). I highly recommend a scraper (aka "baker's helper"). Finally the cooking times are a bit arbitrary and you can always go longer if you want more crust.

baguette

1. Put the flour and yeast in the mixing bowl and add the water.
2. Start the mixer with the dough hook on low until they combine then run at speed 1 for about 15 minutes.
3. Set the machine on low and add some olive oil, then turn the machine off. Remove from the dough hook and turn until an oil-coated ball is formed. It makes it easier to work with and stops it drying out.
4. Either leave it in the mixing bowl or transfer to another and cover with a plate. Leave somewhere warm to double in size.
5. Punch down and turn out onto a liberally floured surface and roll out the bubbles. Cut in halves and fold over thirds several times until a rough log is formed. A bakers scraper helps a lot here.
6. I have a funky 80s baguette form that I then place them in.
7. I let them rise in my oven set to 30C, and spray some water on them to stop them drying out. I then remove the tray from the oven and set the baking temperature.
8. Cook at 220C for about 25 minutes or until they look done.
9. Remove onto a wire rack immediately once done.

Up to about 100g of the flour can be replaced by other flours like semolina (more moist) or bulgar wheat (whole-meal like). This is probably a bit wet for a true baguette but it makes great rolls and buns as well.

ciabatta

1. Take 200g of the flour, the yeast, and 200ml of the water and mix in a bowl until a slurry is formed. Cover and leave for 12-24 hours somewhere at a cool room temperature. It should rise and puff up and go stringy.
2. Put the remaining (200g) flour(s) in a mixing bowl. Add the rest of the water (200ml) to the starter to help remove it and pour that into the mixing bowl.
3. Set the mixer running and let it go for about 15 minutes. Put in the oil and try to form a (wet) ball using a scraper.
4. Either leave it in the mixing bowl or transfer it to another and cover with a plate. Leave somewhere warm to double in size.
5. This is likely going to be messy. Pour from the bowl onto a very floured surface and use the scraper and adequate flour to form two soft logs of dough.
6. I then transfer the logs to a deep baking dish with a piece of baking paper folded in the middle to form a barrier.
7. I cover that with another tray and let them rise.
8. Cook at 220C for about 25 minutes or until they look well done.
9. Remove onto a wire rack immediately once done.

This is a simplified version of a stupidly complex multi-stage recipe I found on the internet. I've only made it a couple of times so I might need to make some changes.

Update: So this just isn't working right, yet. I tried a bit last night and it's texture is more like a crumpet than anything else! I'm not sure if I'm just not letting it rise enough before baking it, or the mix is a bit too wet, although I suspect it's a bit of both. Yesterday I ran out of hours in the day and cooked it because the oven was hot but I probably should've left it (much) longer. I will need to experiment more, but will try with a reduced recipe as this makes a lot of bread!

Update: Take 2. I reduced the water and flour a bit and let the formed loaves rise for much longer. The bread itself is soft and 'bready' with a slight sourdough taste. The crust is OK but not thick enough, it probably needs more time in the oven. The dough is still so wet that it 'runs' as it proves to fill the available space, I'm not sure how I could get around that other than less water again. It's nice bread however.

Dutch Oven Bread

1. Put the flour and yeast in the mixing bowl and add the water.
2. Start the mixer with the dough hook on low until they combine then run at speed 1 for about 15 minutes.
3. Set the machine on low and add some olive oil, then turn the machine off. Remove from the dough hook and turn until an oil-coated ball is formed. It makes it easier to work with and stops it drying out.
4. Either leave it in the mixing bowl or transfer to another and cover with a plate. Leave somewhere warm to double in size.
5. Carefully turn out onto a liberally floured surface and use a scraper to fold a few times and form into a ball. Do not punch down.
6. Line a bowl with baking paper and place the ball into the middle. Cover them with a plate and let it rise.
7. When it is nearly done rising put an enameled dutch oven with it's cover on into the oven and pre-heat to 220C.
8. Using the paper, carefully transfer the risen dough into the put and put the lid back on.
9. Bake for about 20 minutes, remove the lid, and bake for about 10 minutes more or until done. If you're keen you can remove the paper at this point but it doesn't make a lot of difference.
10. Remove onto a wire rack immediately once done.

This was based on a '2 hour' 'no-knead' bread recipe but then I realised I was using the mixer anyway so why not just let it do it's thing. The original made more of a bread-cake, and this makes proper bread but with a 'rustic' look and a great crust. I just had a piece and it's really very good.

This one can likewise have some of the flour replaced.

Workbench 2.0 Theme Updated!

So I finally gave up on KDE and went back to xfce4. The way I had things seutp there wasn't a lot of difference but there wasn't anything to be gained either. Login was stupendously slow but the showstopper was not being able to drag windows to another virtual desktop - possibly you can do it but I don't care now.

Of course xfce4 is also borked because it uses gtk3 now ... so I wanted to fix the scrollbars. And then I wanted to have grey backgrounds on windows ... so I ended up creating a new AmigaOS theme for xfce4 that merges my window manager theme with a couple of separate gtk themes I found on www.xfce-look.org.

T'is a bit rough but it works!

Go to the Workbench 2.0 project page for further details and how to get hold of it!

X Windows System

I also had an ugly fight with .Xdefaults and xterm settings along the way. Slackware's xterm uses some really shitty colours and disables things like 'bold' (which i particularly like in my man-pages, thank-you-very-much). The magic line required to get anything to even work is:

XTerm*customization: -color

I haven't gone through and fixed the colours yet, or worked on emacs with a grey background but I guess I will do that eventually as well.

It still works!

And finally, I switched to xdm as my login manager. It's ugly but it's fast as fuck and simple to use. The kde one kept wanting to default to kde and I like the simplicity of xdm anyway.

Firefox Web Extensions

I decided to publish a couple of trivial web extensions for firefox that I use. They just toggle preferences settings so the extensions themselves are completely trivial.

Unfortunately you need to use a fucking web service to make them installable in the browser, but at least you can then install them later using the "anus menu" in about:addons. Due to this i've included the signed .xpi files in the repository.

blogz mobile

Another small update to the site that should improve the display on mobile phones or other very narrow browsers.

Firstly it switches to mobile mode earlier at 640 pixels width rather than 480. Images are now resized to fit when in this mode. And I changed the tag menu to be a compact version - this required a small change to the generator but is implemented in the css.

No idea on browser compatability but it WORKSFORME on my desktop machine.

blogz update

Today I checked in some small changes to blogz (the software which runs this blog).

Primarily they move the blog index and 'etag' value from include files to a .c file so a new post doesn't trigger an almost complete rebuild of the application. It only takes a fraction of a second but it was bothering me!

I also removed some over-indulgent use of meta-make.

I mentioned this on the ZedZone host page but I've also added git-over-http checkout for all my repositorities. The checkout url's are listed on https://code.zedzone.au/.